Pneumatic punch machine is a device used in the punching field of various metal and non-metal pipes and plates.Its structure mainly includes the following key parts:
1.Body:The body and workbench are cast together,providing strong support for the entire equipment.The slider moves up and down in the guide rail of the machine body,which ensures the stability and accuracy of thePneumatic punch machines.The gap between the guide rail and the slider can be adjusted by threading,and after adjustment,it needs to be tightened with a cap to ensure smooth movement.
2.Clutch:The Pneumatic punch machines adopts a composite dry pneumatic clutch,which has the characteristics of simple structure and reliable operation.The built-in bearings of the flywheel are closely integrated with the clutch.When the control button is activated,the solenoid valve presses air into the clutch,thereby transmitting the power of the flywheel to the crankshaft for operation.The kinetic energy key on the control panel can achieve continuous operation of the stroke,as well as safe operation modes such as inching.
3.Sliding block:The sliding block is a key component for Pneumatic punch machines to perform stamping actions.The connecting rod and ball joint adjustment screw convert the circular motion of the crankshaft into the reciprocating motion of the slider.The ball screw can also adjust the locking force and coordinate with the adjustment of the height of the mold used.The lower end of the slider is equipped with a mold handle hole for fastening the mold.For large molds,the template holes on both sides can be used for fixation.The slider adjustment hole is equipped with a material return device,which can adjust the top material seats on both sides according to the height of the mold,achieving automatic material removal work.
4.Operating mechanism:The operating mechanism is controlled by a microcomputer and the panel displays the status mode.When the status bar shows inch movement,the machine can be started synchronously with both hands.This design makes the operation easier and safer.At the same time,Pneumatic punch machines can also choose manual,semi-automatic,or fully automatic working modes according to actual needs.
In summary,the structural design of the Pneumatic punch machines is reasonable and compact,and the various components work together to achieve efficient and precise stamping operations.
Address：Room 1202, Detaitang Building, No. 118 Huaguang Road, Zhangdian District, Zibo, Shandong
WhatsApp：+8615653328535
Wechat： +8615965331535 
E-mail：zs@sdsmachinery.com
