Punching machine Punching machine, also known as punching machine, is a metal stamping machine tool mainly used to shape or punch holes on metal plates. The following is a detailed introduction to the punch press:
【2025/01/08】
Deep throat punch Deep throat punch, also known as deep neck punch press, is a mechanical equipment widely used in the field of metal processing, used for processing various metal sheets and workpieces. Deep throat punch machines have received widespread attention and use for their efficient and precise stamping capabilities. Deep throat "refers to its deep working throat depth, which can complete deep forming processing in one stamping. The "punching" of a punch press refers to the application of pressure through a punching die to complete the forming process of a metal sheet or workpiece on the punch press.
【2025/01/06】
Oil press press Oil press press is an important mechanical equipment widely used in the processing of hardware, electronics, rubber, plastics and other products. Its working principle is that the oil press press uses hydraulic oil as the working medium, and the hydraulic oil is transported to the oil cylinder through the oil pump, generating pressure to push the piston to perform reciprocating motion, thereby achieving stamping processing of the workpiece.
【2025/01/06】
Numerical control press As an efficient metal processing equipment,numerical control press have multiple processing methods.It can automatically complete various complex metal processing tasks according to program control.Firstly,punching processing can be carried out.By replacing cutting tools of different shapes,numerical control press can drill,mill,bore holes,etc.,thus achieving hole processing of various shapes and sizes.
【2025/01/04】
Pneumatic punch Pneumatic punch is a device used in the punching field of various metal and non-metal pipes and plates.It has a wide range of applications and many advantages. Firstly,pneumatic punchs have the characteristics of high efficiency and speed.Due to its pneumatic drive,it has a fast impact speed and can complete a large number of punching tasks in a short period of time.
【2025/01/03】
Pneumatic punch machine Pneumatic punch machine is a device used in the punching field of various metal and non-metal pipes and plates.Its structure mainly includes the following key parts: 1.Body:The body and workbench are cast together,providing strong support for the entire equipment.The slider moves up and down in the guide rail of the machine body,which ensures the stability and accuracy of thePneumatic punch machines.The gap between the guide rail and the slider can be adjusted by threading,and after adjustment,it needs to be tightened with a cap to ensure smooth movement.
【2025/01/02】
China Pneumatic punching machine Manufacturer Pneumatic punching machine is a kind of equipment used in the punching field of various metal and non-metal pipes and plates, which uses the high-pressure gas generated by the compressor to transport the compressed gas through the pipeline to the solenoid valve, and controls the operation of the solenoid valve through the foot switch to control the work and return of the cylinder, so as to achieve the purpose of punching.The technical principle of pneumatic punching machine:The compressed air can be stored in the gas tank and accessed at any time, so the motor does not waste energy idling. Using the cylinder as the working part and the solenoid valve as the control element, the machine has the advantages of simple structure, low failure rate, high safety, simple maintenance, lower maintenance cost and high production efficiency. The use of 220V power supply to achieve the control of the solenoid valve, simple and convenient operation.
Address：Room 1202, Detaitang Building, No. 118 Huaguang Road, Zhangdian District, Zibo, Shandong
WhatsApp：+8615653328535
Wechat： +8615965331535 
E-mail：zs@sdsmachinery.com